Sounding Rocket 2, now with 200% more sounding [Video]

Here's the SR-2 first flight video (raw unedited):



No problems! Nice, easy flight, sneaking our payload up to a comfortable 140km.

Still, this is quite modest given the capabilities of our rocket. We'll want to take the core concept and develop it at a bit to push the envelope and score some more contracts.

In the next post we'll look at developing the SR-2b, a multi-stage variant of the SR-2 taking advantage of our rocket's untapped power.



Comments

Post a Comment

Popular posts from this blog

Not every rocket's a winner

Image
My initial concept for the SR-2b was to adding staging to the rocket design to be able to get more distance out of it and perform sub-orbital re-entry tests: This design certainly fit the bill in some respects. On a good day it could achieve a height of 250km, double what we'd managed previously. Having similar fuel tanks and engines reduces the tooling cost significantly. It also had no issues around recovery of the payload vehicle (a biological sample)... when it worked. Despite these plus points, I ran in to a major issue with the design. Notice how severely tilted the wing fins are; this was the level of spin stabilisation required to achieve the needed level of spin to keep it going straight. Precession is a natural consequence that comes with spin stabilisation . If the spinning of the rocket is too strong, a large degree of precession occurs. Precession is best demonstrated with a spinning-top example: Source: http://hyperphysics.phy-astr.gsu.edu/hbase/top.html As our leve
Read more

There and back again, a fruit fly's tale [Video]

Image
I noticed in the final simulation that sometimes the design re-enters on the opposite end of the payload than I'd planned. Rather than adding more ablative steel I had a bit of a rummage through the other equipment we already have. I decided to re-purpose a thrust plate. Thrust plates are designed for separating fuel tanks from rocket engine(s) and allowing the mounting of multiple engines. Since they sit directly above rocket engines, they are rated for around 2000K instead of the 700K of steel, making them effective as heat shields for our purposes. As you can see, the flight went well:  aaaand touchdown: Our payload returned successfully and we're now drowning in Science™! We also have enough money to fund the Y-Plane project, finally coming up next...
Read more

Confidence is high. I repeat, confidence is high.

Image
Date : 1954-06-13 Amidst news that the Soviets may be developing an Intercontinental Ballistic Missile (ICBM), their so-called "R7" project , we have been tasked with producing a rocket capable of reaching from Western Europe to Moscow. The objective is simple in its audacity: Increase our rocket's capabilities from 600km downrange to over 3,000km, creating an Intermediate-Range Ballistic Missile (IRBM) before the two superpowers. We have a range of new technological innovations on our side: We have developed a newer, lighter, aluminium alloy for our rockets. We have improved our existing main rocket engines (on par with the Russian RD-102). We have improved our avionics to the point we can control our rocket launches. We have also developed a new upper stage rocket engine similar to the US AJ10-27 engines, which use nitric acid/aniline and are the latest generation of the SR-1 engines we flew right back in 1951. Historical Aside: The Russian RD-102 was never actually d
Read more